***** please take note of edit at bottom *****
Okay
so this one was a big project. I plan on cloth diapering. It saves a
tonne of money plus you are doing the environment a huge favour. I
planned on making a pocket all-in-one diaper (AIO), meaning that
there is a space between the fleecy layer and the waterproof layer
into which you insert a soaker pad and closing the front using
Snappi's . I had everything ready to go including a trial run made
completely out of cheap jersey I had laying around ( which I
even tested on my niece!) and was about to purchase the fabrics and
other supplies on line (totaling about $120) when a light bulb
suddenly went off and I realized that Snappi's can never attach to
PUL fabric. So I scrapped the whole project and started over.
A
friend of mine showed me the diapers she was using on her 3 month old
little boy, and I loved the ease of them, and the look. They are
called a Flip diaper. All it is, is a waterproof cover that can be
re-sized to fit a baby from birth to potty training. You simply lay
an insert inside it and snap the thing onto your baby. It doesn't
bunch up like regular cloth diaper which I always thought looked
really bulky on babies, but rather sits nice and snug. And the best
part: it's super cheap, especially if you make your own inserts like
I did. You only need about 7 covers and then a whole bunch of
inserts. In total I have spent just about $150 on diapers (including this current project)...this will
last me several years.
(This
next bit is not based on my experience, but the experience of
friends)
Three
“issues” with cloth diapers and newborns:
Now
a flip diaper, is fantastic, but in the beginning, at least for the
first couple days (about 5 give or take a day) babies have this
really gross tar like poops which will destroy your cloth diaper, so
it's best to use either disposable diapers for the first week or
disposable liners for inside your cloth diaper.
Another
problem with cloth diapers and newborns is that the cloth diaper,
even when placed into the smallest size settings, may be too big for
your little one.
And
last but not least, that little umbilical cord that is still
attached to your baby's soon to be belly button. It needs room, and
your typical cloth diaper is probably going to cover it. (unless of
course you have specifically purchased newborn cloth diapers.)
My
plan to resolve the
new-born-might-not-fit-into-my-already-purchased-diapers situation:
make my own cloth diapers for newborns.
I
based my diaper cover from a blog I read by “Sweet 'n' Sassy Girls”
who created a tutorial on how to make your own flip style diaper
cover. I used her tutorial as a guide for my own so I give her/them
some credit for guiding me.
Here
is how I did it:
Visit
www.fabric.com and purchase
some on sale PUL (polyurethane laminate, basically it's fabric that
has a waterproof layer on it to prevent leaks). I purchased this on
line because it was much cheaper to do so than to purchase it in
store. I did do some price comparisons: at fabric land, this
material could be purchased for $33 per metre (roughly per yard for
those south of the Canadian boarder) or online at just under $10 per
metre. I purchased a yard each of three different colours (this left
me with enough to also make wet bags for my diaper pail)
Trace
a new born size disposable diaper (the ones with the dip for the
umbilical cord) onto a piece of cardboard to make a pattern and cut
it out. (I find it easier to trace the cardboard onto the fabric
after than to trace a paper).
 |
| new born disposable with dip |
 |
| traced and cut out the pattern |
Your
PUL fabric will have different textures on either side. One side
will feel like plastic/rubber. I'm going to call it the plastic side
in this blog. The other side will feel like polyester, to which I
will refer to as the soft side. Just so that we can stay on the same
page. What you want to do now is trace your cardboard pattern onto
the plastic side of your fabric. You will want to trace the ends of
your pattern twice (see pic) to create the pockets of the diaper.
And then using anything with a straight edge create 2 strips about
3 cm (about 1 ½ inch) wide and a little shorter than your diaper is
long. These will be for the leg elastics.
Cut
out all your pieces.
Focusing
now on the 2 narrow strips. What you are going to do is iron down
one of the edges on each one. This might be tricky to do without
burning your fingers, but it is doable. Ironing it will make it
easier to create a clean edge when sewing. Make sure you are ironing
the correct side. By that I mean, you are ironing the plastic side
onto the plastic side. The heat of the iron will cause the plastics
to melt together to create a bond.
Now
the sewing begins: lets start with the front pocket. What you want
to do first is line the main diaper piece up with the pocket flap.
Make sure that the soft sides are together. I have set my
stitch setting to the large zig-zag. This is my personal preference
for the edge, I find it easier to make sure everything gets
connected properly but you can use a straight stitch if you want. Don't start at the very beginning of the flap,
as you will need some room for the start of the leg elastics. Now
zig-zag stitch carefully (no need to rush unless you are in labour)
from one end to the other. Repeat this step for the back pocket and
remember to place the soft sides together.
 |
| line the edges up. SOFT SIDES TOGETHER! |
 |
| large zig-zag stitch |
 |
| This is where I begin stitching rather than at the start of the material |
Next
you'll want to cut some elastics for the legs and the back. The two
leg elastics should be about 10 cm (or 4”) and the back elastic
about 6 cm (~3”) you want to tack the ends in place to your
diaper. Attach them to the plastic side of the main diaper piece
right about where it curves into the flaps. I attach them using a
small zig-zag stitch going backwards and forwards a couple times
until they are secure. Remember you are not sewing the entire length
of the elastic, but just tacking the ends in place.
 |
| for the legs |
 |
| for the back |
Attach
the back elastic in the same way. I tacked the back elastic at
almost the distance as the leg elastics if that makes any sense.
Hopefully you can see/tell by the pic what I mean.
 |
| small zig-zag for elastics |
 |
| leg elastics tacked on |
 |
| back elastic tacked on |
Now
for attaching the leg bands (the pieces you ironed). Lay your diaper
so that the plastic side is facing up. Set your sewing machine to
the straight stitch setting. You want to first sew the non ironed
edge plastic side down to the leg curve of the diaper starting just
above the spot you tacked the elastic. And sew it up until the other
tacked end, maybe a tiny bit past. (Make sure the elastic stays out
of the way, you don't want to sew that down). Do this for both leg
bands. You might have extra length once you reach the end, just cut
that off.
 |
| Stitching down the non-ironed edge to the leg curve. |
 |
| Does this pic help? This is what you should have on both leg curves now |
This
is a little bit difficult, but not impossible. The hard part about
this is not sewing your elastic: Flip your diaper over. You now need
to sew the other side of the leg band, the ironed side. (we ironed
this because it is going to be on the outside of the diaper, and you
want it to look neat). Still using the straight stitch, pull the
band into place and stitch it down at the end. You can use the
stitch marks from the other side as a guide to see where you need to
sew. As you sew, you will need to stretch the elastic and make sure
that is doesn't get sewn down. You are essentially creating a pocket or casing around the elastic. Do this for the other leg band as well.
 |
Stitch down the ironed edge. I tried to line my edge up with
the the stitch line which you can see in this picture. Make sure
you don't sew the elastic! |
 |
| This is what you should end up with. |
Now
you need to go back to the pocket flaps and finish sewing those down
at the elastics if they are still unsewn there.
 |
See how I didn't sew this part down at the beginning?
sew it down now. it should slightly overlap the elastic casing. if it overlaps
a lot, cut some of it away. |
Flip
the pockets so that the whole thing is now right side out. What we
are going to do now is top stitch around the pockets to create a
nice flat edge. Make sure to stretch the back elastic and bring the
top stitch below this elastic to create a casing around it. We are
not finished yet!
 |
| Turned right side out. (Starting to look like a diaper!) |
 |
| Put your sewing machine on this setting. It ensures that your stitch is nice and close to the edge. |
 |
Top stitch the ouside edges. Don't forget to stretch and go below the back
elastic to create a casing. |
 |
| Like so. |
I
use snaps to to close my diapers. You could use vlecro, but for this
tutorial, I'm using snaps. I purchased my KAM snap plier set along with
100 white snaps from eBay for $20. Once again, had I purchased this
entire set at a fabric store I would have paid around $85. Don't do
that.
First
I will attach the 2 female snaps ( yes they are referred to as male
and female, if you know your birds and the bees, you should be able
to figure out which is which). These will attach to the back pocket.
It's best to poke a hole first with the provided tool, because its
difficult to force the snap through the PUL fabric
 |
| Poke hole, place snap. |
 |
| squeeze them together. |
 |
| and there..... |
 |
| ...you go. |
Next
we attach the front snaps, the male counter parts. I drew dots first
so that I knew where to place each snap.
I
placed one set of snaps fro re-sizing purposes also, should my
little one be too small to even fit this tiny diaper. To do this, we
will only be attaching to one layer of the PUL fabric, so it is best
to cut little squares from leftovers of the same fabric to create
extra durability. The first row should be the male snaps, and the
bottom should be the female snaps.
Voila!
Your diaper cover is complete! Now let me show you how I plan on
stuffing it.
I
made my own liners out of cotton bed sheets that I purchased at my
local thrift store. These are about 4 layers thick, so I might either
use 2 at a time or create an extra soaker pad out of old towels if
needed. I also purchased a couple sets of stay dry fleece liners by
Bum genius. This are intended to keep pee away from the baby's skin
but still allow it to pass through to the soaker pads. Apparently
they are great for night time. They were inexpensive, but you can
also use velvet or fleece apparently.
Anyways
clearly my liners are way to big for this tiny diaper, so we just
fold it in half, and tuck each end into the pocket flaps and snap the
buttons into place to their proper size, whatever that may be. I
rolled the liner a bit at the legs to keep it tucked in and to
prevent any possible leaks.
Here
is my little diaper cover compared to my flip diaper cover.
I hope this detailed step by step tutorial will help others make their own cloth diapers. You can make regular sized diapers by tracing other sizes of disposables, without the dip too. or you can use on of the many patterns you can find on line. The flip style so far is my favourite, even though our little one won't be trying them out until August. But I've seen them in use, and many people rave about them.
The cost of my diapering system for this little one plus future babies: under $200 not including laundering costs (roughly an extra $150 per year), but if you wash at off peak hours and hang dry, it's not a whole lot. At least not compared to disposable diapers: roughly $1800 per child per year... that's a lot of money. think of this way, lets say you have a child in 2012. this means he/she will be in diapers until 2015. You have baby 2 in 2014, in diapers until 2017, and baby 3 in 2016 in diapers until 2019. for each year each child is in diapers you are paying roughly $1800.
Disposable diapers:
2012-2015... $1800 x3 = $5400
2014-2017...$1800 x 3= $5400
2016-2019...$1800 x3=
$5400
$16 200
I mean have I made a serious calculation mistake here??? 3 kids, each in diapers for three years.
Cloth diapering costs from 2012-2019 (7 years)
initial $200 + ($150 x 7 years of laundry costs)= $1250
lets be fair and add $200 per child for diaper repairs extra laundry costs and what not, so an extra $600 making it $1850 over the course of 7 years.
Which would you rather pay?
*****Edit:*****
September 17th 2013
My son is now just over 3 weeks old. These diapers worked okay for the first week or two. Then they seemed uncomfortable on him. Here are the problems I experieinced:
1. The inserts were too bulky, easy fix, I made some small ones out of old towels and some stay dry fabric.
2. The diaper was entirely too small. If you plan to make these, I suggest skipping out on the adjusting snaps and adding an extra 2 or so inches in the length, or adding a lot more length ( maybe 4-5 more inches) if you want to keep the adjusting snaps.
3. The elastics were too tight. This is also an easy and obvious fix
